2011 Chevrolet Corvette Clutch Flywheel Parts

Choose your Submodel for your 2011 Chevrolet Corvette


Showing 1 - 6 of 6 products
Image
SKU
Product
Rating
Price

Advanced Clutch
  • XACT Flywheel Prolite
  • XACT Flywheel Prolite
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
    • Friction Surface Diameter:
      • 11
      • 280
    • Tooth Quantity: 168
    • SFI: 1.1
    • Mounting Hole Quantity: 6
    • Product Weight (lbs.): 14.6
  • Features:
    • Excellence in Performance", backed by the best one-year warranty in the industry!
  • 600585 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.

This Part Fits the Following OEM/Substitute Numbers:
2-LS1-STU, 460530, 700142, FW-LS1-SF, GF502A, SC75S

Additional Fitment Information:
Vehicle Block CC Cylinder Head Type Engine Designation Engine Sub Model CID
2011 - Chevrolet Corvette V 7011 OHV LS7 8 Cyl 7.0L Z06 Carbon 427

Advanced Clutch
  • XACT Flywheel Prolite
  • XACT Flywheel Prolite
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
    • Friction Surface Diameter:
      • 11
      • 280
    • Tooth Quantity: 168
    • SFI: 1.1
    • Mounting Hole Quantity: 6
    • Product Weight (lbs.): 14.6
  • Features:
    • Excellence in Performance", backed by the best one-year warranty in the industry!
  • 600585 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.

Additional Fitment Information:
Vehicle Block CC Cylinder Head Type Engine Designation Engine Sub Model CID
2011 - Chevrolet Corvette V 7011 OHV LS7 8 Cyl 7.0L Z06 Carbon 427

Ram
  • steel flywheel
  • OEM 11.75; 11 in. Diaphragm
  • Steel flywheel GM LSX/98-02/OEM 11 Diaphragm
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2011 - Chevrolet Corvette V 6162 8 Cyl 6.2L Base 376

Mcleod
  • Flywheel: Nodular Iron: Chevrolet: 1997-04 LS-1: Internal Balance: 168T
  • Flywheel: Nodular Iron: Chevrolet: 1997-04 LS-1: Internal Balance: 168T
  • Product Attributes:
    • Flywheel Material: Nodular Iron
    • Engine Balance: Internal Balance
    • Engine: 1997-2004 Ls1,ls6
    • Pressure Plate Pattern: 12in. Borg & Beck With 10mm Bolt & Dowel Pin
    • Ring Gear: 168t
    • Make: Chevrolet
  • Features:
    • Cast Iron Flywheels are a inexpensive way to replace your old used flywheel with new!
  • McLeod nodular iron flywheels offer high-quality, yet low-cost alternatives to the hassles of resurfacing a flywheel. Nodular iron flywheels are stronger than the OEM models, and these McLeod units are direct bolt-in units. Don't overlook your flywheel when replacing your clutch. But don't resurface, replace with McLeod nodular iron flywheels

Additional Fitment Information:
Vehicle Block CC Region Engine Sub Model CID
2011 - Chevrolet Corvette V 7011 United States 8 Cyl 7.0L Z06 Carbon 427

Mcleod
  • Flywheel: Steel: Chevrolet: 1997-13 LS-X:6 Bolt: 168T: 28 Lbs
  • Flywheel: Steel: Chevrolet: 1997-13 LS-X:6 Bolt: 168T: 28 Lbs
  • Product Attributes:
    • Flywheel Material: Steel
    • Engine Balance: Internal Balance
    • Engine: 1997-2013 Ls1/ls2/ls3/ls6/ls7 6 Bolt Crank
    • Disc Diameter: 11in./12in.
    • Clutch Pattern 2: 12in. Ls1/ls6 Diaphragm, Metric Bolts, With Dowel Pins
    • Clutch Pattern 1: 11in. & 12in. B&b & Diaphragm Shouldered Bolt
    • Ring Gear: 168 Tooth
    • Weight: 30 Lbs
    • Make: Chevrolet
  • Features:
    • McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
  • McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.

Additional Fitment Information:
Vehicle Block CC Region Engine Sub Model CID
2011 - Chevrolet Corvette V 7011 United States 8 Cyl 7.0L Z06 Carbon 427

LuK
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Incl.Clutch Flywheel Ring Gear

Additional Fitment Information:
Vehicle Sub Model
2011 - Chevrolet Corvette Z06 Carbon
Showing 1 - 6 of 6 products

Loading...